Warranty Exclusions - Wells H-33 Operation Installation Maintenance Manual

1. Resetting the safety thermostats, circuit breakers, overload protectors, or fuse replacements unless
warranted conditions are the cause.
2. All problems due to operation at voltages other than specified on equipment nameplates -conversion to
correct voltage must be the customer's responsibility.
3. All problems due to electrical connections not made in accordance with electrical code requirements and
wiring di agrams supplied with the equipment.
4. Calibration of heat controls after the first sixty (60) days on original components. Replacement of item&
subject to normal wear to include such items as knobs, light bulbs, baskets, grids, mechanical timers and
thermocouples. Normal maintenance functions including lubrication, adjustments of airflow, thermostats,
door mechanisms, microswitches, burners and pilot burners and replacement of fuses and indicating lights
are not covered by warranty.
5. All fry pots welded in the field.
6. Deterioration of aluminum vessels due to insertion of food product or use of abrasive cleaners is not
covered by warranty.
7. Full use, care, and maintenance instructions are supplied with each machine. Those miscellaneous
adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.
8. Travel mileage is limited to sixty (60) miles from an Authorized Service Agency or one of its sub-service
agencies.
9. All labor shall be performed during regular working hours. Overtime premium will be charged to the
buyer.
10. All genuine Wells replacement parts are warranted for ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only to replacements of the defective part. Any use of
non-genuine Wells parts completely voids any warranty.
11. Installation, labor, and job check-outs are not considered warranty.
12. Charges incurred by delay's, waiting time or operating restriction's that hinder the service technicians
ability to perform service are not covered by warranty. This includes institutional and correctional
facilities.
WELLS MANUFACTURING COMPANY SERVICE
POLICY AND PROCEDURE GUIDE ADDITIONAL

WARRANTY EXCLUSIONS

8