4-Pin Video Cable Harness; Power Harness - Safety Track UCIT Installation And Configuration Manual

Safety Track 249 Main Street Belleville, MI 48111 888‐286‐9829
4‐Pin Video Cable Harness
Power Harness
*Note: When connecting wiring harness, the Chassis Ground should be an isolated connection to a true
Chassis Ground not tapped into an existing ground circuit. The Signal Ground connections can be
combined and added to an existing ground circuit or a new ground circuit.
When extending wires on the power harness, a solder connection is recommended. If solder is not
available, a weatherproof butt style connector should be used.
1. Channel 1 (Black)
2. Channel 2 (Red)
3. Channel 3 (Yellow)
4. Channel 4 (White)
1. 12v Output
2. Signal Ground
3. Signal Ground
4. Constant Power
5. 12v Ignition Power
6. Chassis Ground
7