Bezel; Remove The Front Bezel; Install The Front Bezel; Hard Drives - Dell SC7020 Owner's Manual

Bezel

The front bezel is a cover for the front panel of the SC7020 storage system.

Remove the Front Bezel

Before you remove or install hard drives in the storage system, remove the front bezel.
1. Use the system key to unlock the keylock at the left end of the bezel.
2. Lift the release latch next to the keylock.
3. Rotate the left end of the bezel away from the front panel.
4. Unhook the right end of the bezel and pull the bezel away from the storage system.
Figure 6. Installing and Removing the Bezel
1. Keylock

Install the Front Bezel

To secure the storage system, install the front bezel.
1. Hook the right end of the replacement bezel onto the front panel of the storage system.
2. Insert the left end of the bezel into the securing slot until the release latch locks into place.
3. Secure the bezel with the keylock.

Hard Drives

The SC7020 storage system supports hot-swappable hard drives.
The SC7020 storage system supports a minimum of 7 internal 2.5-inch drives up to a maximum of 30
drives. The drives are installed from left to right, and then top to bottom. The first row of drives are
Replacing SC7020 Storage System Components
2. Front bezel
13