Yamaha XZ10YMXH Owner's Manual page 165

3. Check the coolant level when the engine
is cold (the coolant level will vary with en-
gine temperature).
TIP
The coolant level in the coolant reservoir
should be between the minimum and maxi-
mum level marks.
2
3
1. Coolant reservoir cap
2. Maximum level mark
3. Minimum level mark
4. If the coolant level is at or below the mini-
mum level mark, remove the coolant res-
ervoir cap and add coolant to the
1
Coolant reservoir capacity
(up to the maximum level mark):
5. Install the reservoir cap.
6. Install the hood when finished servicing
8-34
maximum level mark. NOTICE: If cool-
ant is not available, use distilled water
or soft tap water instead. Do not use
hard water or salt water since they are
harmful to the engine. If water has
been used instead of coolant, replace
it with coolant as soon as possible,
otherwise the cooling system will not
be protected against frost and corro-
sion. If water has been added to the
coolant, have a Yamaha dealer check
the antifreeze content of the coolant
as soon as possible, otherwise the ef-
fectiveness of the coolant will be re-
duced.
[ECB01012]
0.31 L (0.33 US qt, 0.28 Imp.qt)
the vehicle.
8