4. Install the differential gear oil drain bolt
and its new gasket, and then tighten the
bolt to the specified torque.
Tightening torque:
Differential gear oil drain bolt:
9.8 N·m (0.98 kgf·m, 7.1 lb·ft)
5. Refill the differential gear case with the
recommended oil. NOTICE: Be sure no
foreign material enters the differential
gear case.
[ECB00412]
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
8
Oil quantity:
0.18 L (0.19 US qt, 0.16 Imp.qt)
TIP
GL-4 is a quality and additive rating; GL-5
rated hypoid gear oils may also be used.
If desired, an SAE 80W-90 hypoid gear oil
may be used instead.
6. Check the oil filler bolt gasket for dam-
age, and replace it if necessary.
7. Install the differential gear oil filler bolt
and its gasket, and then tighten the bolt
to the specified torque.
Tightening torque:
Differential gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
8. Check for oil leakage. If oil leakage is
found, check for the cause.
EBU35110
Coolant
Check the coolant level prior to each time you
operate the vehicle, and have a Yamaha deal-
er change the coolant every two years.
Checking the coolant level
1. Park the vehicle on a level surface.
2. Remove the hood. (See page 8-10.)
8-33