Preparation; Pairing The Wireless Speaker With Your Smart Device; Using The 3.5Mm Audio Input - Doss SoundBox xs User Manual

• Use the supplied USB cable to charge your portable speaker directly
from your computer micro USB port or the cellphone adapter(please
confirm its output is 5V)
• Make sure that the speaker is fully charged before using it for the
LED light will remain RED when charging and turn off once charge
completes.
steps to turn the device off as well.

Pairing the wireless speaker with your smart device

1. Place your smart device and wireless speaker no more than one meter
away from each other.
seconds to turn it on.
3. Set your smart device to "discover" the wireless speaker. Upon
powering on, a tone will be heard, the blue LED will start flashing,
the pairing mode.
4. Enabled Bluetooth on your device and choose DOSS SoundBox xs from
the list.
5. If pairing is successful, the LED will change to steady blue and your
for 5 seconds and have a try again.
Note: If your smart device cannot discover the SoundBox xs,long press the

Using the 3.5mm Audio Input

1. Plug one end of a 3.5mm Audio cable into the unit.The mode indicator
light will display a red light.
2. Plug the other end of the 3.5mm Audio cable into other audio devices.
3. Turn on the speaker, it will play music from the audio device.
4. If you want to Play/pause the tune,or change Previous/Next tune just
and have a try again.
on your audio device.