Answering And Ending A Call Using Your Speaker Or Mobile Phone; Using It With Your Echo Dot - Doss SoundBox xs User Manual

Answering and ending a call using your speaker or mobile
phone
1. When there is an incoming call, the speaker will generate a tone and
call using the speaker.
3. Speak with a clear voice right into the built-in microphone located on
may also end the call directly using the command on your cell phone.
5. When listening to music using your smart phone, playback will resume

Using it with your Echo Dot

You can connect the Dot with the speaker using a 3.5 mm auxin cable
or Bluetooth. Please use the following steps to set up using Bluetooth:
1. Download the Alexa APP, follow the standard setup procedure to
get the dot connected to your home Wi-Fi network.
2. Switch the SoundBox xs speaker to Bluetooth mode,you can press the
3.
4. Tap the Echo Dot in your list of Alexa Devices, then tap Bluetooth.
5. The SoundBox xs speaker should appear in the list of Bluetooth Devices.
listed, tap on The SoundBox xs speaker to complete the pairing process.
To remove the device, return to Bluetooth -> tap the name of the
speaker -> then tap "Forget Device".
Note:
Voice command will not be able to turn on/off the SoundBox xs no
only translate sound signal.