Table of Contents
Advertisement
Basic TIG / S tick Welding
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURy:
protective gear must be worn when using the Welder; minimum shade number 10 full face shield
(or welding mask), ear protection, welding gloves, sleeves and apron, NIOSH-approved respirator, and fire
resistant work clothes without pockets should be worn when welding.
Light from the arc can cause permanent damage to the eyes and skin.
do not breathe arc fumes.
• DC TIG Welding is used to weld
mild steel and stainless steel using
a TIG Rod and shielding gas.
• AC TIG Welding is used to weld aluminum
using a TIG Rod and shielding gas.
• Stick Welding is used to weld mild
steel and stainless steel using a
Stick Electrode without shielding gas.
Good welding takes a degree of skill and experience.
Practice a few sample welds on scrap before
welding your first project. Additional practice
periods are recommended whenever you weld:
• a different thickness of material
• a different type of material
• a different type of connection
• using a different process
Make practice welds on pieces of scrap to practice
technique before welding anything of value.
TO pREVENT SERIOUS INJURy,
FIRE ANd BURNS:
keep welding tip clear of grounded
objects whenever unit is plugged
in and turned on.
Page 28
practice your welding
technique on scrap
pieces before welding
anything of value.
For technical questions, please call 1-888-380-0318.
power
On
=
Item 63621
Hide quick links:
Advertisement
Table of Contents
