Table of Contents
Advertisement
d. Optional Settings:
• Press Main Control Knob to
enter Optional Settings.
• Turn Main Control Knob until desired
setting appears on screen.
• Press Main Control Knob to
select desired setting.
• Turn Main Control Knob to adjust setting.
Available Optional Settings:
• Run-In WFS – A djust wire speed before it
contacts workpiece. This setting represents
a % of the pre-set wire feed speed (WFS).
• Inductance – A djust length of arc.
Increase for more fluid puddle and flatter
bead. Decrease for colder puddle.
• Spot Timer – S et timer for spot welding.
• Recall Setting – R etrieve saved settings.
• Save Setting – P rogram up to 5 different
configurations. Turn Main Control Knob to
scroll between 5 available slots. Press Main
Control Knob to access OVERWRITE MEMORY
SETTING screen and turn Main Control Knob
to choose YES selection. Press Main Control
Knob to save current Welder settings.
Note: The initial settings may need to be
adjusted after stopping and carefully inspecting
the weld. Proper welding takes experience.
gas Shielded, Solid-core Wire Only
dANgER! TO pREVENT dEATH
FROM ASpHyXIATION:
do not open gas without proper ventilation. Fix gas
leaks immediately.
Shielding gas can displace air and cause rapid loss of
consciousness and death.
Shielding gas without carbon dioxide can be
even more hazardous because asphyxiation
can start without feeling shortness of breath.
1. Open gas cylinder valve all the way.
2. Set Flow Gauge to SCFH value
indicated on Settings Chart.
Item 63621
For technical questions, please call 1-888-380-0318.
Page 21
Hide quick links:
Advertisement
Table of Contents
