Syslog; Upnp; Web - Ricoh PRO C900S Network Manual

Hide thumbs Also See for PRO C900S:

Table of Contents

1. Monitoring and Configuring the Machine

• If you do not specify a character string, current setting is displayed.

syslog

Use the "syslog" command to display the information stored in the machine's system log.

View message

msh> syslog

Use the "upnp" command to display and configure the universal plug and play.

Public URL display

msh> upnp url

Public URL configuration

msh> upnp url "character string"

• Enter the URL string in the character string.

Use the "web" command to display and configure parameters on Web Image Monitor.

View Settings

msh> web

URL Configuration

You can set URLs linked by clicking URL on Web Image Monitor.

msh> web "ID" url http:// "The URL or IP address you want to register"/

Specify "1" or "2" for ID as the number corresponding to the URL. Up to two URLs can be registered

and specified.

Resetting URLs registered as link destinations

msh> web "ID" clear url

Specify "1" or "2" for ID as the corresponding number to the URL.

Link name configuration

You can enter the name for URL that appears on Web Image Monitor.

msh> web "ID" name "Name you want to display"

Table of Contents