Table Of Contents; Attention Statements; Warning Labels - Shindaiwa T300 Owner's/Operator's Manual

Contents
1 ATTENTION STATEMENTS .......... 2
2 WARNING LABELS ...................... 2
2-1 The Properly Equipped Operator .... 3
2-2 General Safety Instructions ............. 4
2-3
Be Aware of the Working Environment ..
3 PRODUCT DESCRIPTION ............ 5
4 TECHNICAL SPECIFICATIONS ... 6
5 ASSEMBLY PROCEDURE ............ 6
5-1 Prior to Assembly ........................ 6
5-2 Before assembling Outer Tube ... 7
5-3 Assembly of the Outer Tube .......... 7
5-4 Assembly of the Handle ................. 8
5-5 Throttle Cable Adjustment ............. 9
5-6 Debris Shield Assembly ................. 9
5-7 Installing a Blade ......................... 10
6 STARTING/STOPPING/ADJUSTING
THE ENGINE ................................ 10
6-1 Filling the Fuel Tank .................... 10
6-2 Starting the Engine ...................... 11
6-3 Stopping the Engine .................... 12
6-4 Engine Idle Adjustment ................ 12
7 UNIT CONDITION CHECK ............ 12
8 PRIOR TO OPERATION ................ 12
8-1 To Wear the Strap ........................ 12
8-2 Emergency Release .................... 12
9 Operation ....................................... 13
10 Recommended Cutting
Attachment ................................ 13
11 BLADE SHARPENING ................. 14
12 MAINTENANCE ........................... 14
12-1 Daily Maintenance ..................... 14
12-2 10-Hour Maintenance ................ 15
12-3 10/15-Hour Maintenance ........... 15
12-4 50-Hour Maintenance ................ 15
12-5 Muffler Maintenance .................. 15
12-6 Long Term Storage .................... 16
13 TROUBLESHOOTING GUIDE ..... 16
14
DECLARATION OF CONFORMITY ....
2

1 Attention Statements

Page
Throughout this manual are special
"attention statements" surrounded
by boxes and preceded by the trian-
gular Attention Symbol.
WARNING!
A statement preceded by the
4
triangular attention symbol and
the word "WARNING" contains infor-
mation that
upon to prevent serious bodily injury.
CAUTION!
A statement preceded by the word
"CAUTION" contains information that
should be acted upon to prevent me-
chanical damage.
IMPORTANT!
A statement preceded by the word
"IMPORTANT" is one that possesses
special significance.
A statement preceded by the word
"NOTE" contains information that is
handy to know and may make your job
easier.

2 Warning Labels

Warning labels affixed to the
machine are as follows:
READ AND FOLLOW THE OPERATOR'S
MANUAL. FAILURE TO DO SO COULD
RESULT IN SERIOUS INJURY.
WEAR HEAD, EYE AND HEARING
PROTECTION DURING THE OPERATION
OF THIS MACHINE.
WEAR NONSLIP GLOVES, LONG
TROUSERS AND NONSKID BOOTS
DURING THE OPERATION OF THIS
MACHINE.
MAKE SURE NO ONE IS WITHIN 15
METERS (50 FEET) OF AN OPERATING
ATTACHMENT.
BEWARE OF THROWN OBJECTS.
THE MAXIMUM SPEED OF THE CUTTING
ATTACHMENT SHAFT IN min
SOUND POWER LEVEL (MEASURED IN
ACCORDANCE WITH 2000/14/EC)
19
should be acted
NOTE:
-1 .