Table of Contents
Advertisement
Configuring the unit operation settings
Assigning functions to the USER buttons
Functions can be assigned to the eight USER buttons (USER 1 to
USER 8).
This enables you to operate a desired function by simply pressing a
USER button (USER 1 or USER 8).
USER buttons (USER 1 to USER 8)
1 .
Press the MENU button .
2 .
Open USER BUTTON menu [35] .
3 .
Turn the F1 dial to display the USER button (USER 1 to
USER 8) you want to set .
4 .
Turn the F2 dial to select a function, and then press the
F2 dial to confirm the selection .
1 . U S E R 1
30
(continued)
N D 1
Functions that
Operations when USER buttons pressed
can be selected
Pressing a USER button with a function assigned
selects the corresponding ND filter and turns on
the button indicator.
The selected ND filter value differs depending on
the remote camera being controlled.
<Selected ND filter value>
Remote
camera
AW-HE120
AK-HC1500
ND1,
AK-HC1800
ND2,
ND3,
AW-HE870
ND4
AW-E860
AW-E750
AW-E650
AW-E350
AW-HE100
AW-HE60
AW-HE50
*
: Each press of the USER button with ND1
assigned switches between Off and On.
— : The remote camera setting is not changed
even if a USER button with a function
assigned is pressed.
SWLINK,
BUSCONT,
Assign these settings when using the function for
FASSIST,
linking with a switcher.
⇒ "Setting the functions for when the unit is
CAMSEL,
TALLY_IP,
linked with the switcher" (page 32)
CAMINF
Holding down a USER button with the function
assigned turns on the indicator of the button for
POWER OFF
an instant and sends a power-off request to all
the connected remote cameras.
CAM_PINP CTL,
Assign these settings when an AW-HE2 HD
CAM_PINP MODE,
integrated camera is connected.
⇒ "Operations of AW-HE2" (page 51)
CAM_PINP POS
Note
z When executing the function assigned to a USER button, press
the SHIFT button to turn off its indicator and then perform the
operation.
When a USER button is pressed while the SHIFT button indicator
is on, either the preset memory group is called or shooting mode
selection of the remote camera is executed.
Functions that can be assigned
ND1
ND2
ND3
ND4
Through
1/4
1/16
1/64
Clear
1/4
1/16
1/64
Off/On*
―
―
―
—
―
―
―
Advertisement
Table of Contents
