Table of Contents
Advertisement
5.
LCD
/P
PANEL
RISM ASSEMBLY AND
.
REMOVAL
1. Remove 4 screws A and remove the LCD panel /Prism assembly.
2. Remove 3 screws B and remove the LCD panel.
Note: D
'
ON
T REMOVE THE
PANELS SIMULTANEOUSLY
It becomes impossible to adjust a convergence, if all the LCD panels are
simultaneously replaced. When all the LCD panels are damaged, replace
the whole LCD panel / prism assembly.
A
A
A
LCD
PANEL
R
, G
B
LCD
ED
REEN AND
LUE
!
Never touch
the electrode of flexible cables.
A
-15-
Caution :
HANDLE WITH CARE
LCD panel/Prism assembly is a precision part. Be sure
to handle this part with special attention. Observe the
following notes.
(1) Be careful not to hit the LCD panel with the screwdriver. It
may damage the parts and alignment.
(2) Never touch the LCD panel and prism part directly with
hand. Otherwise the optical parts may get dirty.
(3) Since the LCD panel is equipped with CMOS-LSI, pay
attention to static electricity.
trode of flexible cables.
LCD panel /Prism assembly
!
And never touch the elec-
B
B
B
Advertisement
Table of Contents
