Brionvega Radio.cubo TS522D+S User Manual page 32

4. You can store up to 10 DAB radio stations and 10 FM radio stations (the radio
frequency of the FM station saved by default on all presets is 87.50 MHz).
5. To retrieve one of the 10 stored presets, proceed as follows:
For stored presets 1 to 5 press one of the buttons
6. For stored presets 6 to 10 press SHIFT once (the display of the main unit will show
"SHIFT") and then the button corresponding to the desired preset.
PAIRING, CONNECTION AND OPERATION MODE OF THE UNIT THROUGH THE
BLUETOOTH WIRELESS TECHNOLOGY
device to device. Refer to the instruction manual of your Bluetooth device for the correct pairing
with the unit.
1.
been paired. If the device you want to connect has Bluetooth turned on, it will automatically
connect to the radio.
2. Turn on your Bluetooth device (for example a SmartPhone), enter the Bluetooth setup
menu and scan for available devices. In the list of found devices the label TS522D+S will
be shown.
3. Connect the device to the TS522D+S unit, the device will show the "Connected" status
4. At this point, with the TS522D+S radio it will be possible to wirelessly play the music stored
inside the associated device.
5. While a device is connected via Bluetooth, if you want to pair it with another Bluetooth
seconds until you hear a "beep" sound, or by disabling the connection established directly
from the Bluetooth menu of the associated device. The unit will switch directly to pairing
mode and, at this point, you can connect another device.
CAUTION:
For mobile phones with Bluetooth 2.0, you will be prompted to enter a password during the
pairing process. Press the following string: 0000 (zerozerozerozero)
1/6 2/7
32
3/8 4/9 5/10