Installing And Replacing The Remote Control Battery; Getting Started - Brionvega Radio.cubo TS522D+S User Manual

INSTALLING AND REPLACING THE REMOTE CONTROL BATTERY

The remote control is supplied with a battery of the "CR2025" type that must be installed.
When the remote controllable distance is lower, or if it ceases to function properly, it is time to
replace the battery.
To perform this simple operation, proceed as follows:
CAUTION:
Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to
with metal objects, do not mix them with other types of batteries, and do not store them with
hazardous materials or fuels. Store in a cool, dry and ventilated place. Follow the laws and
regulations for transport and disposal.

GETTING STARTED

1. Remove the protective plastic from the battery compartment of the remote control as
2. Connect the supplied power adapter to the DC input on the rear panel of the radio.
Connect the other end of the power supply to an AC outlet.
3.
4. Turn on the device by pressing the standby button on the main unit or on the remote
control. The radio will enter DAB mode and start scanning for stations. At the end of the
scan, the unit will automatically use the date and clock information gathered from the DAB
stations
1. Remove the battery compartment as indicated in the
instructions printed on the back of the remote control
2. In case of replacement, remove the battery, insert the
(making sure that the "+" side is facing upwards)
3. Replace the battery in the slot.
30