Computed Sources - Bosch DDU 8 Manual

Notice
10.4
10.4.1
Bosch Motorsport
Measurement of 'Revolution' is similar.

Computed sources

Configuring computed sources
Computed sources receive data from a measurement channel rather than an in‐
put pin.
▪ Sensitivity/Offset calculation on input channel
▪ Characteristic curve calculation on input channel
▪ Computed vehicle speed
▪ PWM output control (covered in a special section)
▪ Lap trigger (covered in a special section)
Example: Sensitivity/offset calculation on input channel
1. Click 'Measurement Sources' in the Toolbox.
2. Drag the 'Sensitivity/Offset' computed source from the Toolbox and drop it
on 'Computed Channels' in the DDU 8 Project Tree.
A 'Computed Sensitivity/Offset Wizard' opens.
3. Click 'Next' when done.
4. The second part of the 'Computed Sensitivity/Offset Wizard' opens.
DDU 8 Manual
Analog and Frequency Inputs | 10
Choose input
channel
Choose unit group
and unit of output
Enter sensitivity and offset
of conversion formula
83 / 160