Table of Contents
Advertisement
4-3. Do-it-yourself maintenance
Wait for several minutes with the engine switch on, and then
turn the engine switch to the ACC or LOCK position.
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code of tire pressure
warning valve and transmitter. Have the ID code registered by your
Toyota dealer.
When to replace your vehicle's tires
n
Tires should be replaced if:
You have tire damage such as cuts, splits, cracks deep enough to
l
expose the fabric or bulges indicating internal damage
A tire goes flat repeatedly or cannot be properly repaired due to the
l
size or location of a cut or other damage
If you are not sure, consult with your Toyota dealer.
496
Push and hold the tire pressure
warning reset switch about 3
seconds. After releasing the
switch, check that the tire pres-
sure warning light blinks slowly
three times.
Hide quick links:
Advertisement
Table of Contents
