Table of Contents
Advertisement
4 SIM card (Dataplan speed, PIN code OFF)
The camera is designed by using 3G cellular network to send MMS photos to any phone number or email address
instantly once the photo or video is taken.
-
Make sure that your SIM card 3G dataplan provides atleast 21Mb/s transmission speed
-
Be sure that the PIN Code is OFF from the SIM card before inserting SIM card to camera. (You can disable
the PIN of a SIM card via your mobile phone. Then reinsert the card into your camera)
5 Installing your SIM card and SD card
UM785 camera has no storage space to store pictures. You need to insert a SD memory card to let the camera work
correctly. SD and SDHC (High Capacity) cards up to a maximum 64GB capacity are supported. Using high speed
SD cards (SanDisk3 Ultra3 or Extreme3 series or similar) is recommended if you will use the 1280x720 or
1920x1080 video settings.
Make sure the power switch is at OFF position before you insert SIM card or SD card into camera. You can use any
SD card size up to 32G. The camera will not turn on without a SD card inside.
Before you switch camera to ON mode, please double check that the write-protect switch on the side of the card is
"off" (NOT in the "Lock" position).
NOTE: Every photo taken by this camera will be saved to SD card even those have been sent out wirelessly to the
recipients. You will always have access to high resolution photos on the SD card. SD card can be over written to
ensure cycle use
6 Customizing camera settings
6.1 Formatting the SD card
Press MENU button, then choose SYS tab. Navigate down by pressing the ▼ button until the FORMAT option is
highlighted and press OK then choose Yes to format.
Figure 5
6.2 Download U set
Select the NET tab and navigate down to the DOWNLOAD TOOL and press OK. Shown as Figure7 and Figure8;
-
Turn the camera off
-
Remove the SD card from your camera and insert into your personal PC card reader
-
Locate the SD card reader in your computer
Page 3
Hide quick links:
Advertisement
Table of Contents
