Work Time - Uovision UM785-3G Instruction Manual

Figure 28 Trigger Mode Figure 29 Trigger options
PIR trigger
When choose PIR trigger, the PIR is active. Any motion (animals or humans) that is detected by PIR will trigger
camera to capture a photo or video according to the preset PIR sensitivity and PIR Interval.
PIR Sensitivity
The camera monitors temperature of ambient conditions. Auto is camera automatically adjusts the sensitivity of
sensor/trigger signal, on cold days it is ok to choose Low, on hot days it is better to choose High to be more
sensitive to slight variations in temperature.
PIR Interval
Allows you to customize how often the PIR sensor can be allowed to work. This prevents the card from filling up with
too many redundant images. Options are 0-60 seconds (5 second increments) and 1-60 minutes.
Time lapse
When choose time lapse, camera takes photos or videos even when it is not triggered by a nearby live animal,
useful for constant monitoring of an area that might be far away from the camera. The interval time between each
photo/video is set in submenu Time Lapse. It sets the time lapse interval between each photo/video, when the
trigger mode is Time Lapse or both. The time options include 5-55 seconds (in 5 second increments), 1-5 minutes
(in 1 minute increments), 5-55 minutes (in 5 minute increments), 1-8 hours (in 1 hour increments) and 24 hours.
Both
It means PIR and Time Lapse are both active.
For example: Someone placed this surveillance camera in a country park entrance, selected both, set the PIR
interval as 5 second, set the Time Lapse as 4 hours, means that in addition to every 4 hours automatic field scan
shooting.

6.5.5 Work Time

The camera can just work at a preset time and preset days. In the rest of the time the camera is under standby
mode.
There are four work time can be set, see Figure 30.
Page 11