Table of Contents
Advertisement
6.5.3 Video Mode
When you set Camera Mode as Video, then you will see these submenu shows up.
Video Size
Select video resolution (in pixels per frame). Higher resolution produces better quality videos, but creates larger files
that will take up more SD card space and fills it up faster. It provides Full HD 1080P (1920x1080, 30fps), HD 720P
(1280x720, 60fps) and WVGA (848x480, 60fps) videos. Default set is 720P HD.
Figure 24 Video Size
Figure 25 Video size
Video Length
Video length is the length per captured video clip. The video length is from 5s to 60s. The default setting is 10s. For
saving power, it is better to set video length within 10 - 20s
NOTE 1) For saving flash power, it is suggested to set video length within 10s if video sending is ON!
NOTE 2) For the cold winter climate, it is recommended connect the camera to 6V external battery!
NOTE 3) If the 10 seconds video sending is ON and available battery power is minimal, camera switchs
automatically to STILL picture sending! Please secure sufficient power for the camera
Figure 26 Video Length
Figure 27 Video Length
6.5.4 PIR TAB
Trigger Mode
There are 3 trigger modes: PIR trigger，Time lapse and PIR trigger & Time lapse.
Page 10
Hide quick links:
Advertisement
Table of Contents
