OPERATIONS
The order of operations has been studied to obtain the best working quality in the shortest time.
The operation numbers are composed of.
a ) the vehicle code « GX » or « GX.ea » *
b) a three-figure number designating the unit or the unit component
c ) a figure indicating the kind of repair :
- Figures 0 0 0 indicate the characteristics of the vehicle
- Figures 0 0 indicate the characteristics of the unit
- Figure
0 indicates the checks and adjustments
- Figures 1, , 4, 7 indicate removals and fittings
- Figures 2, 5, 8 indicate strippings and reassemblings
- Figures 3, 6, 9 indicate reconditionings
TOOLS
Special tools are indicated in the text by a number followed by the letter T.
Complementary tools are indicated in the text by a number preceded by the index MR.
TIGHTENING
TORQUES
The torques are expressed in decaNewton metre ( m.daN ), statutory torque measuring
NOTE : When the indication "torque wrench" is mentioned following the value of a tightening torque, the operation must be
IMPERATIVELY carried out with a torque wrench.
IMPORTANT REMARKS
For all technical information regarding these vehicles, please contact :
The Service Department
Citroen Cars Ltd.
Mill St.
Slough, Berks G B - Tel. Slough 23808
DEPARTEMENT TECHNIQUE APRES-VENTE, ASSISTANCE TECHNIQUE - 163. avenue Georges
NANTERRE ( FRANCE ) Tel : 725-97-l0
*
« GX.ea » : vehicle with automatic clutch
0.981 m.N = 1 m.kg ( former measuring unit)
In practice: 1 m.daN = 1 m.kg
unit :
Clémenceau
- 92000