Settings - Marantz SR6012 Owner's Manual

Contents Connections

Settings

Configure the IP address.
If you are using a broadband router (DHCP function), the information
0
required for network connection such as the IP address will be
automatically configured since the DHCP function is set to "On" in the
default settings of this unit.
Set up the IP Address, Subnet Mask, Default Gateway and DNS server
0
information only when assigning a fixed IP address or when connecting
to a network without DHCP function.
Network/Settings
DHCP
-IP Address
-Subnet Mask
-Default Gateway
-DNS
Save
Cancel
Configures the network settings automatically or manually
Front panel Display
Playback
Off
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
Rear panel
Settings
o DHCP
Selects how to connect to the network.
On
(Default):
Off:
o IP Address
Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses
0
are set.
CLASS A: 10.0.0.1 - 10.255.255.254
CLASS B: 172.16.0.1 - 172.31.255.254
CLASS C: 192.168.0.1 - 192.168.255.254
o Subnet Mask
When connecting an xDSL modem or connector adapter directly to
this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input "255.255.255.0".
221
Remote
Tips Appendix
Configure the network settings
automatically from your router.
Configure the network settings manually.
Index