Onix DNA-50 User Manual page 7

Connections
② Inputs
Your input selections across the back of the amplifier, will look as shown
below:
Each of the letters along the top represent a colour, and this corresponds
with the LED's along the front of the unit. So from left to right you have:
Orange, Green, White, Red,
Turntable (Record Player) should you own one and wish to use it with your
amplifier. 'I/P' stands for Input, and you have five of these that can be
used with any other products that you might choose to connect.
③ Mains
Finally you can now plug in the mains lead supplied with the DNA-50 into
the socket that looks like the one in the diagram below. Make sure you
not turn the power on before plugging the lead into the amplifier as this
could cause a risk of electrical shock.
Ensure that you fully insert the mains cable into the socket before turning
on as a loose connection could cause safety issues as well as performance
ones.
Yellow and Blue. 'DSC/BDA' is your input for a
ONIX DNA
do
7