Appendix C: Additional Grounding Notes - RBI UL 2703 Installation Manual

A P P E N D I X C : A D D I T I O N A L G R O U N D I N G N O T E S
The RBI Solar RS-VS mounting system may be used to ground and/or mount a PV module complying with UL
1703 only when the specific module has been evaluated for grounding and/or mounting in compliance with the
included instructions.
In order to maintain the Listing for bonding, Listed (ZODZ) or R/C(ZODZ2) wire management device(s) must be
assembled according to the manufacturer's instructions.
The RBI Solar RS-VS is a non-separately derived system that is listed under UL 2703 and was evaluated with the
modules listed in the table below. The max fuse rating is 30A, which covers most modules.
Module Manufacturer
SolarWorld
Hyundai
RBI Solar RS-VS | IG 2017
Table 1. UL 2703 Approved Modules
Sunmodule Plus, SW xxx Mono (33mm frame) where xxx is 275 to 300
Sunmodule SW xxx XL Mono (33mm frame) where xxx is 320 to 350
Sunmodule Pro-Series, SW xxx Poly (33mm frame) where xxx is 250 to 260
Sunmodule Protect, SW xxx Mono (33mm frame) where xxx is 275 to 280
HiS-MxxxRG where xxx is 250 to 260
HiS-SxxxRG where xxx is 260 to 270
HiS-SxxxRW where xxx is 255 to 265
Module Series
HiS-MxxxMG where xxx is 230 to 250
HiS-SxxxMG where xxx is 245 to 265
18