Rs-Vs Accessory Mounting Installation - RBI UL 2703 Installation Manual

R B I S O L A R A C C E S S O R Y M O U N T I N G I N S T A L L A T I O N
As part of the UL 2703 Listing, any type of flat plate (common to most microinverters and power
optimizers) can be bonded to the rest of the system provided that the plate meets the requirements listed
below. After installing the provided hardware, tighten to 10 ft-lbs.
RBI Solar RS-VS | IG 2017
M8-1.25 304 SS serrated flange nut
(torque to 10 ft-lbs)
5/16" 304 SS flat washer 1.5" OD
0.12" thick
Flat plate (common to
microinverters/power optimizers;
5052-H32 aluminum; 2mm thick)
Burndy 304 SS WEEB-CCR2
M8x1.25 x 20mm 304 S
T-bolt w/ nylon patch
11