Link4 iPonic 624 User Manual page 43

The CO2 Settings screen
allows you to program a
Deadband to prevent
equipment from turning on and
off, set a Fan Cut Off time to
not waste carbon dioxide,
switch between a CO2 tank
and/or generator, and configure
all cycle times.
Your CO2 equipment will not
run when the CO2 Fan Cut Off
option is enabled. This will
prevent you from wasting
carbon dioxide.
The CO2 Cycle On Time allows
you to schedule the time when
carbon dioxide is injected into
the room from a tank.
The CO2 Cycle Off Time is set
to shut off to allow the carbon
dioxide to fill the room to avoid
saturation.
iPonic™ 624 User Manual
Page 43 of 56