Link4 iPonic 624 User Manual page 38

The Sensor Setup screen in
the Advanced menu allows you
to program the temperature,
humidity, CO2 and light
configurations for each sensor.
In the Sensor Setup screen,
you can manually assign
sensors to inputs on your
controller.
After you confirm your settings
in the Sensors Setup screen,
you can assign it to a specific
input.
The Sensor Calibration option
allows you to manually adjust
collected data. The Raw value
is the direct reading from the
sensor. The CAL value is added
to the Raw value to generate
the ADJ value. The ADJ value
will be reflected in the status
screen.
iPonic™ 624 User Manual
Page 38 of 56