Table of Contents
Advertisement
In the Utility menu, Ping is selected by default.
5.
Select the Ping Test Parameters IPv4 or IPv6 radio button.
6.
Specify the following parameters for the ping utility:
•
Target. The IP address of the ping target computer.
•
Ping Size. The size (in bytes) of the ping packet.
•
No. of Pings. The number of times to ping the target computer. The maximum
number of pings is 128.
•
Ping Interval. The time between pings.
7.
Click the Start Test button.
The ping results display.
8.
To stop a ping test, click the Abort Test button.
9.
To clear the results from the display, click the Clear Results button.
Run the Traceroute Utility
To display the route and measure transit delays of packets across an IP, run the traceroute
utility.
To run a traceroute test:
1.
Launch a web browser from a computer or mobile device that is connected to the
modem router network.
2.
Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Administration > Diagnostics.
AC3200 WiFi Cable Modem Router
Manage Your Network
85
Hide quick links:
Advertisement
Table of Contents
