Table of Contents
Advertisement
3.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select Wireless.
5.
In the Region menu, select your region.
In some locations, you cannot change this setting.
6.
To control the SSID broadcast, select or clear the Enable SSID Broadcast check box.
When this check box is selected, the modem router broadcasts its network name (SSID)
so that it displays when you scan for local WiFi networks on your computer or mobile
device.
7.
To change the network name (SSID), type a new name in the Name (SSID) field.
The name can be up to 32 characters long and it is case-sensitive. The default SSID is
randomly generated and is on the modem router label. If you change the name, make
sure to write down the new name and keep it in a safe place.
8.
To change the WiFi channel, select a number in the Channel menu.
In some regions, not all channels are available. Do not change the channel unless you
experience interference (shown by lost connections or slow data transfers). If this
happens, experiment with different channels to see which is the best.
When you use multiple access points, it is better if adjacent access points use different
channels to reduce interference. The recommended channel spacing between adjacent
access points is four channels (for example, use Channels 1 and 5, or 6 and 10).
9.
To change the mode, select it from the Mode menu.
10.
Click the Apply button.
Your settings are saved.
AC3200 WiFi Cable Modem Router
Specify Network Settings
69
Hide quick links:
Advertisement
Table of Contents
