Factory Settings - NETGEAR C7800 User Manuals

Factory Settings

You can return the modem router to its factory settings. Use the end of a paper clip or a
similar object to press and hold the Reset button on the back of the modem router for at least
seven seconds. The modem router resets, and returns to the factory configuration settings
shown in the following table.
Table 4. Factory default settings
Feature
Modem router User login URL
login
User name (case-sensitive)
Login password (case-sensitive)
Local network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP range
DMZ
Time zone
SNMP
Cable modem Inbound (communications coming
firewall in from the Internet)
Outbound (communications going
out to the Internet)
WiFi WiFi communication
SSID name
Security
Broadcast SSID
WiFi (continued) Country/region
RF channel (2.4 GHz)
RF channel (5 GHz)
Operating mode
1. Maximum WiFi signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions
and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower
actual data throughput rate.
AC3200 WiFi Cable Modem Router
Default behavior
www.routerlogin.com, www.routerlogin.net, or
192.168.0.1
admin
password
192.168.0.1
255.255.255.0
Enabled
192.168.0.2 to 192.168.0.254
Disabled
ISP/MSO ToD (time of day) configuration
Enabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Enabled
See the modem router label
WPA2-PSK (AES)
Enabled
United States
1
Auto
CH 153 (or manually select Band I and 4 Channels)
Up to 1000 Mbps at 2.4 GHz, 2167 Mbps at 5 GHz
Supplemental Information
111