Getting Started; Activating Skyfi2 - Delphi SKYFi2 User Manual

Getting Started

4

Activating SKYFi2

To quickly begin enjoying XM
Satellite Radio with your SKYFi2,
follow these simple steps:
1. Set up your SKYFi2 Receiver using
the installation instructions included
in the SKYFi Home Kit, SKYFi
Vehicle Kit, Delphi XM SKYFi
Marine Kit, or with the help of a
professional installer.
Warning: Failure to properly follow all
installation instructions could result in personal
injury, death, and/or damage to your SKYFi2
Receiver and/or to your vehicle or other property.
2. Press the power button to turn on
your SKYFi2 and verify that it is
playing Channel 1, the XM
Preview Channel.
3. Select Channel 0. The receiver's
eight-character XM Satellite Radio
ID will appear on the display.
Write the ID here:
Note: Carefully check your XM Radio ID.
The letters I, O, S, and F are not used.
4. Activate your XM Satellite Radio
service. To subscribe, make sure
you have your XM Satellite Radio
ID and a major credit card. Contact
XM at http://activate.xmradio.com
or by calling 1.800.852.9696.
5. After subscribing, make sure you
keep your receiver on for at least
one hour in order to activate the
full channel lineup.
Warning: When using this product it is
always important to keep your hands on the
wheel. Not doing so could result in personal
injury, death, and/or damage to your SKYFi2
Receiver and/or to your vehicle or other property.