Auto-On; Auto-Off And Sleep Timer; Aiming The Home Antenna - Delphi SKYFi2 User Manual

Auto-On

Normally, SKYFi2 turns on whenever
it receives power. If SKYFi2 is wired to
a power source that is always on, you
should disable the "Auto-On" option:
1. Press the "menu" button.
14
2. Use the scroll wheel to select
"Auto-On." Press the "XM" button
to confirm selection.
3. Select "Off." Press the "XM"
button to confirm selection.
4. Press the "menu" button to return
to normal operation. You must
now use the button to turn
SKYFi2 on or off.

Auto-Off and Sleep Timer

You can set SKYFi2 to automatically
shut off between 15 minutes to three
hours after being turned on. Use this
feature if SKYFi2 continues to receive
power even after you remove the
ignition key; setting Auto-Off prevents
SKYFi2 from draining the vehicle
battery. You may also use Auto-Off as
a "sleep" feature to turn SKYFi2 off
automatically after a period of time.
To set Auto-Off:
1. Press the "menu" button.
2. Use the scroll wheel to select
"Auto-Off/Sleep Timer." Press the
"XM" button to confirm selection.
3. Use the scroll wheel to select the
time period. Press the "XM"
button to confirm selection.
4. Press the "menu" button to return
to normal operation.

Aiming the Home Antenna

To ensure best reception, aim the
home antenna with the following
method:
1. Press the "menu" button.
2. Use the scroll wheel to select
"Antenna Aiming." Press the
"XM" button to confirm selection.