Table of Contents
Advertisement
Transport SR Series Installation Guide
SERIAL 0, 1
PSTN
Reset Switch
This is located on the underside of the unit near the front. Pressing the switch gently with
the tip of a pen or other suitable implement while the unit is powered will generate a
hardware reset.
These DB 25 sockets provide synchronous/asynchronous RS232
serial ports which may be used to connect the router to
compatible serial devices. To comply with EMC requirements it
should not be used with a cable longer than 2 meters.
This socket is used to connect the router to a PSTN line.
7
Advertisement
Table of Contents
