Table of Contents
Advertisement
Fan Speed Readings
The following fan speeds are displayed: Fan1 Speed~Fan 12 Speeds
Baseboard Voltage and Temperature
The he following temperature and voltage settings will be displayed (in degrees in
Celsius and Fahrenheit) as detected by the BIOS:
•
System Temperature, +1.8V Aux, +1.2V BMC, +1.0V NIC, +1,1V AUX, +1.0V
PEX, +5.0V, +1.1V, +1.8V, +12.0V, +1.5V, VBAT, +3.3V, and +3.3V VSB.
CPU0 Voltage and Temperature~CPU7 Voltage and
Temperature
The following temperature and voltage settings of a CPU specifi ed will be displayed
as detected by the BIOS:
•
CPU Temperature
Low – This level is considered as the 'normal' operating state. The CPU tem-
perature is well below the CPU 'Temperature Tolerance' level. The onboard
fans and CPU run normally as confi gured in the BIOS. User intervention:
No action required.
Medium – The processor is running warmer. This is a 'precautionary' level
and generally means that there may be factors contributing to this condition,
but the CPU is still within its normal operating state and the CPU 'Tempera-
ture Tolerance' level. The onboard fans and CPU run normally as confi gured
in the BIOS. The fans may adjust to a faster speed depending on the Fan
Speed Control settings. User intervention: No action is required. However,
consider checking the CPU fans and the chassis ventilation for blockage.
High – The processor is running hot. This is a 'caution' level since the CPU's
'Temperature Tolerance' has been reached or exceeded. The overheat alarm
may be triggered. The system may shut down if it continues for a long period
to prevent damage to the CPU.
•
CPU Vcore, CPU Vcache, CPU Millbrook 1.1V, CPU Branch0 VDD 1.5V, and
CCPU Branch1 VDD 1.5V
Super IO Confi guration (for the W83527 HG chip)
•
Super IO Chip: This item displays the status of the onboard Super IO chip.
5-15
Chapter 4: AMI BIOS
Advertisement
Table of Contents
