Properties; Security - Citronix ci5200 Operation Manual

The following controls are used to calibrate, test and set Printer specific settings and
configurations. These controls should only be changed by a Citronix trained service engineer.
1.
2.
3.
4.
5.
6.
7.
(5)

Properties:

The properties page is used during installation to set up the printer for a particular application. It is
used for setting up the accessories such as photocells, encoders and beacons.
(6)

Security:

The security page allows certain features of the printer to be disabled until a user with the correct
privileges logs in. By default Security is disabled. To enable security you must have at least one
user with security privileges.
Draft Version 0.1
Service
Flush Prime
Override
Test Valves
Run Pump
HV Trip
Advance Service
ci5000 Series Printer Operation Guide
2-7