Hama 00039749 Operating Instruction page 11

Note: If the message shown above is not
displayed, the Hama WLAN USB Stick was
not correctly identifi ed by your PowerMac.
Ensure that the stick is correctly con-
nected to a USB 2.0 port and that the USB
2.0 interface card was correctly installed
in your system.
After the Hama WLAN USB Stick has been
properly detected, the following window
opens.
Select the New environment... option
under Environment.
Name the new environment e.g. WLAN
and click the OK button.
Select the Environment menu item again
in the Network window and select the
New environment which has also been
selected, WLAN in our case. Next, select
the Show/Display menu item in the
Network window and select the Network
confi gurations option.
Note: The process for selecting the con-
nections can vary depending on the MAC
model and features.
In our case, remove the tick for all con-
nections except the Ethernet connection
(en2). Then click the Activate button.
The confi guration process is now comple-
te for your system.
10