Uninstalling The Driver And Confi Guration Program On Windows; Installing The Driver And Confi Guration Program On Mac Os; Confi Guring The Operating System And Computer (Mac Os X) - Hama 00039749 Operating Instruction

Select Use the following IP address and enter your IP address in accordance with the sample.
1.PC = IP address 192.168.1.1 Subnet mask 255.255.255.0
2.PC = IP address 192.168.1.2 Subnet mask 255.255.255.0
Click Ok to confi rm your entries.
5. Uninstalling the driver and confi guration program on Windows
Select Start => Settings => Control Panel => Software
To do so, select Hama Wireless Utility and click Remove. At the next prompt, click Remove completely.
Remove the device from your computer when prompted to do so. Afterwards click OK.
The program is now deleted from your computer.
After the software is removed, you may have to restart the system. Save all open documents and close
all programs before restarting the PC.
6. Installing the driver and confi guration program on MAC OS X
Before installation, please save any open documents you may be working on. Then close all running
programs. Ensure that you have administrator authorisations to enable you to install the driver correctly.
Connect the Hama WLAN USB stick to a free USB 2.0 port. Then start your Apple computer. After the
operating system has loaded completely and the desktop is complete, insert
the enclosed driver CD-ROM in your drive. An icon with the CD-ROM then ap-
pears on your desktop. Double-click the icon and select the MAC driver directory in the Finder window.
This directory contains the DMG fi le required for installation. Double click the DMG fi le to activate the
image.
After you activate the image, select the correct directory for your installed MAC OS X Version and then
double click the corresponding PKG fi le. Installation is now started.
Select your hard drive on which you want to install the driver and the confi guration program. You must
then restart the system.
7. Confi guring the operating system and computer on MAC OS X
After you have installed the driver, you must
confi gure the network environment in
accordance with the new situation. To do so,
proceed as follows.
Click the Apple symbol in the upper menu
bar and select the Environment menu item.
Select the "Network" setting menu item. The
following window opens. Click OK to confi rm
the message.
9