Table of Contents
Advertisement
Gigaset SX763 WLAN dsl / en AnnA / A31008-M707-R131-1-7619 / configure_router.fm / 20.07.2006
WEP encryption
If WPA is not supported by all components in your wireless network, we recommend
that you activate
ì
In the Security field, select WEP.
ì
Select the Authentication type:
– Select Shared to require that each client logs in to the network with a specified
key.
– Select Open to permit data transfer within the wireless network without the need
to enter a key.
You can choose either the standard 64-bit key or the more robust 128-bit key. The keys
are generated in hexadecimal or in ASCII format. You must use the same keys for
encryption and decryption for the Gigaset SX763 WLAN dsl and all your wireless
network adapters.
ì
Select the Key length: 64 bits or 128 bits.
ì
Select the Input type, i.e. whether the key is to be entered manually or generated
automatically by means of a Passphrase.
Generating a key by means of a Passphrase
ì
Enter a Passphrase (up to 32 characters) and confirm it by entering it again. Four
keys are generated.
ì
Select one of the four keys as the Default key.
WEP Encryption
on the components.
Configuring Advanced Settings
83
Advertisement
Table of Contents
