Table of Contents
Advertisement
Gigaset SX763 WLAN dsl / en AnnA / A31008-M707-R131-1-7619 / appendix.fm / 20.07.2006
Symptom
You cannot connect to the
Internet.
You cannot open a connec-
tion from a wireless device
to the Gigaset SX763 WLAN
dsl.
Possible cause and solutions
ì
Check whether the Connect on demand option is
deactivated. If it is, connections cannot be opened
automatically.
ì
Select Connect on demand. Remember that this
setting may lead to higher costs if you are billed on
the time used.
ì
The connection may have been terminated manu-
ally with the Connect on demand option selected.
– Restore the connection again manually using the
Connect button or
– Restart the Gigaset SX763 WLAN dsl.
In both cases, the Connect on demand setting will
be active again.
u
The wireless network adapter is not using the cor-
rect SSID.
ì
Change the SSID on the network adapter.
u
Either WEP encryption has been activated on the
Gigaset SX763 WLAN dsl but not on the wireless
network adapter or it is using the wrong WEP key.
ì
Activate WEP encryption on the network adapter
with the correct key.
If you do not know the key, you will have to reset
the Gigaset SX763 WLAN dsl (page 20).
Warning: Please bear in mind that this will return
all the configuration settings to the factory set-
tings.
u
WPA protection is activated on the Gigaset SX763
WLAN dsl but not on the wireless network adapter
of the appropriate PC.
ì
Install and configure WPA protection on the PC.
Appendix
135
Advertisement
Table of Contents
