Table of Contents
Advertisement
Gigaset SX763 WLAN dsl / en AnnA / A31008-M707-R131-1-7619 / configure_router.fm / 20.07.2006
A screen appears with security information; you can skip this for the initial configura-
tion. If you carry out all the general and security settings using the wizard as described
below, your device and network will be fully protected. If not, the next time you log on
you will be informed of security gaps in the configuration program.
ì
Click OK.
You will now see the start screen.
The start screen
The start screen is the starting point for all configuration and administration
procedures.
Start screen functions
On the start screen you can make the following settings:
u
Select the language for the user interface (page 33),
u
View the selected connection service and the status of the Internet connection,
choose a different connection service and set up or close an Internet connection
(page 33). Depending on the connection mode selected, the start screen shows the
status and also the button Connect or Disconnect,
u
open the Status menu to obtain status information about the Gigaset SX763 WLAN
dsl (page 111),
u
call up the wizard for the basic configuration (Basic Setup Wizard see page 35),
u
call up the Security Setup Wizard (page 42),
u
open the Advanced Settings menu for additional configuration options
(page 52).
You can call up the wizards, the Advanced Settings menu and status information at any
time and on any user interface screen using the tabs at the upper margin of the user
interface.
The user interface
31
Advertisement
Table of Contents
