Table of Contents
Advertisement
6.
Launch the Software
To launch the software, either double click on
the Posi3 USB icon located on your PC's
desktop screen or click on the start button to
access All Programs / Sperian / Biosystems
Posi3 USB / Standard Edition / SCBA Test
6.1
Pre-Test Requirements
Before the software will allow the testing of
breathing apparatus, the following
requirements must be met:
1. Log in to the software (see section 6.2).
2. Set up a new user account with the ability
to create and test apparatus in the
software. The Setup User doesn't have
these rights, so at least one new user
must be created (See section 6.3).
3. Create an apparatus model in the software
(See section 6.4). Users with OEM
software versions will not have this option
because the apparatus models are
included in the OEM software's built-in
database and cannot be modified.
4. Assign a serial number to the apparatus
you want to test (See section 6.5)
6.2
Initial Login
At the initial software launch, there will be no
system users in the database, so an initial
User ID and Password are used to enter the
software.
The initial User ID and
password are both "Setup"
Note: User ID and Password are case
sensitive.
After successful login, the software will prompt
the user to open the test results database that
was created during the installation procedure
(see section 4.1 step 19 above).
Select the database and click Open.
The software will offer the option to search for
software updates and/or manufacturers
bulletins.
If you wish to check for either of these items,
click on the appropriate options and then click
Check.
Click "Done" to proceed to the initialization.
At the initialization screen, click the "Initialize
PosiChek" checkbox to establish
communication with the instrument. The
software must be able to communicate with
the Posi3 USB in order to perform tests.
.
The Transducer Stability Test screen will be
shown.
19
Hide quick links:
Advertisement
Table of Contents
