Honeywell Posi3 USB Setup Manual page 16

Once the application launches, the following
screen will be shown.
In the left pane under the Server List, double
click on "PostgreSQL Database Server 8.1".
Enter the password that was entered for the
cluster Superuser in the advanced installation.
For those who performed the basic
installation, the password is "biosystems".
Click OK. The server information screen will
then be shown.
From the Tools Menu select Server
Configuration / postgresql.conf to access the
PostgreSQL backend configuration settings.
The "Backend Configuration Editor" screen
will be shown.
In the "Backend Configuration Editor", double-
click on "listen_addresses" to access the
configuration settings for listen addresses.
Click on the "Enabled" box. The default entry
for the Value input box is "localhost". To limit
the database access to the host PC, the
setting should be "localhost".
To grant client access to clients that are NOT
on this PC, the value should be changed to an
asterisk ("*"). The asterisk setting allows the
PC that is creating the database to continue to
access the database along with the listen
addresses that will be specified in the Client
Access Configuration screen.
Click OK and return to the main pgAdmin III
screen.
The "Backend Access Configuration" must
also be changed for other clients to have
access.
16