Table of Contents
Advertisement
SETUP INSTRUMENT MENU
The CI-203 has a number of utility functions that allow the user to manage the instrument's
capabilities. These functions are accessed by pressing the RIGHT arrow when Setup is highlighted on
the Main Menu. The setup utility options are: Autosave, Measure, Scanner, Storage, Time and SDcard.
Use the UP/DOWN arrows to select the desired option and then press the RIGHT arrow to enter the
choice.
Setup AutoSave Feature
Pressing the RIGHT key when Autosave is highlighted enters the Autosave feature. This allows the
user to setup the instrument to automatically store measurements, and to start a new measurement
without explicitly saving the old one. This mode is convenient when taking fast, repetitive
measurements as well as when it is not necessary to review each measurement immediately after
taking it.
In the Autosave setup mode, the top line of the display will read "autosave =" on the left and either
"yes" or "no" on the right. The bottom line of the display will read "stop" and "save" and the
directional arrows.
To set the instrument up to automatically store measurements press the UP/DOWN arrow key until
the word "yes" is on the display, then press the SAVE key to save the configuration. To set the
instrument up to automatically discard measurements, press the UP/DOWN arrow key until "no" is on
the display, then press the SAVE key to save the configuration. To avoid changing the configuration,
press the STOP key to exit back to the Setup Menu.
Setup Measure
Pressing the RIGHT key when Measure is highlighted enters the Setup Measure mode. Here the user
can switch between Leaf and Root mode using the UP/DOWN arrows. For instructions to access
Conveyor mode, see Appendix I of this manual. Press SAVE when the desired mode is on the display.
Press STOP to go back to the Setup Menu.
The Measure Leaf mode is the regular mode for doing leaf measurements using the CI-203 and the
arm. When the instrument is in Root Mode, the arm is removed and the instrument is used in
conjunction with the CI-203RL root length tray accessory. Please see Appendix II of this manual for
more information about using the CI-203 in Measure Root mode.
1554 NE 3
Ave, Camas, WA 98607, USA
rd
Phone (360) 833-8835 Fax (360) 833-1914
Autosave
=
<stop>
<save>
Measure
=
<stop>
<save>
sales@cid-inc.com http://www.cid-inc.com
CI-203 Instruction Manual rev. 8/9/2016
yes
Leaf
7
Advertisement
Table of Contents
