Stand-Alone Data Interface Unit (Pdiu-Ds) Connections - Toshiba Strata DK User Manual

The Grand Tour

Stand-alone Data Interface Unit (PDIU-DS) Connections

The data telephone is connected to the PC serial communications port (COMX, where
X = 1, 2, 3, or 4) or terminal with an RS-232 cable and connector. It is connected to
the Strata DK system like any other digital telephone with a modular cord.
Stand-alone Data Interface Unit (PDIU-DS)
Connections
Data devices, such as printers, modems, mainframe computers, etc., must be
connected to a PDIU-DS with an RS-232 cable and connector. An RS-232 connector
is below
Figure 2
See the Strata DK I&M Manual for detailed installation instructions.
Note
The PDIU-DS must be connected to the Strata DK system with a modular cord.
Similar to a regular station, the PDIU-DS is assigned a station number.
Toshiba recommends connecting the line sides of the modems to standard
telephone ports to ensure access to the complete set of modem pooling features.
Connecting the modems to a dedicated CO line may not allow access to the whole
set.
4
(see Figure 2).
RS-232 Connector
Stand-alone DIU Connector
1 2 3 4
DNT4
Strata DK PC/Data Interface 5/00