Toshiba Strata DK User Manual page 19

To verify communications from your PC or terminal
Type AT and then
press Enter on your
PC or terminal.
Type AT commands
as capital letters (use
caps lock).
To call from your PC or terminal
1. Type ATDD , the
[PDN] of the other
data telephone, and
then press Enter .
If "BUSY" displays
on your screen, the
call automatically
terminates. You can
then try again.
2. Exchange data.
Strata DK PC/Data Interface 5/00
Data Call to Another Internal Data Telephone's PC or Terminal
AT commands appear on your PC or terminal as you
type them.
Wait for this display:
AT
OK
The above display verifies that communications exist
between your PC or terminal and your data telephone.
The Data Call LED turns ON (red) after you press
Enter .
Wait for this display:
ATDDYYY
CONNECTXXXX
This display indicates that a connection has been
established between the called and calling terminals
and/or PCs.
XXXX = data transmission speed
YYY = called data telephone number
The [DN] of a data telephone's RPCI-DI is the same as
its voice [PDN].
Example: If the other data telephone's [PDN] is 209,
type ATDD209 and press Enter . ( ATDD is the DIU
command for data call dialing, and 209 represents the
[PDN] of the other data telephone).
The data can be exchanged using your terminal or PC
software program as required.
Features
11