Download Print this page

Citizen C650 Abbreviated User Manual page 2

Hide thumbs Also See for C650:

Advertisement

Using the world time
1.
Push the crown in to position
2.
Rotate the crown to move the mode hand to point [TME] or [CAL].
• When [CAL] is selected, the calendar is displayed.
3.
Press and release the lower right button
button
to select an area.
B
The selected area and its time or calendar are indicated on the digital display
and the area name display.
Table of time zones and representative areas
Area name Representative
area
Coordinated
UTC
Universal Time
LON
London
PAR
Paris
ROM
Rome
CAI
Cairo
IST
Istanbul
MOW
Moscow
Kuwait
KWI
DXB
Dubai
KHI
Karachi
DAC
Dhaka
BKK
Bangkok
SIN
Singapore
HKG
Hong Kong
PEK
Beijing
• The time zone in the table is based on UTC (Coordinated Universal Time).
• Countries or regions may change time zones for various reasons.
Setting the summer time
You can set the summer time for each area.
• You cannot set the summer time for "UTC".
1.
Push the crown in to position
2.
Rotate the crown to move the mode hand to point [TME].
3.
Press and release the lower right button
button
repeatedly to indicate an area name you want to set
B
the summer time to.
4.
Pull the crown out to position
The second hand points 0 second and the summer time setting starts
blinking.
5.
Press and release the lower right button
• Each time you press button
alternately.
6.
Push the crown in to position
.
0
or upper right
A
Time
Area name Representative
zone
area
TYO
Tokyo
±0
SYD
Sydney
NOU
Noumea
AKL
Auckland
+1
HNL
Honolulu
ANC
Anchorage
+2
LAX
Los Angeles
DEN
Denver
+3
MEX
Mexico City
+4
CHI
Chicago
+5
NYC
New York
+6
YUL
Montreal
+7
CCS
Caracas
RIO
Rio de Janeiro
+8
BUE
Buenos Aires
.
0
or upper right
A
.
2
.
A
, the summer time ON/OF(OFF) changes
A
to finish the procedure.
0
Switching the time of analog and digital sections
The time of the analog section (hour/minute/24-hour hands) cannot be adjusted
directly.
Set the time of the area you want to indicate in the analog section once in the
digital section and then switch the time between the analog and digital sections.
• The second hand and the second indication displayed on the digital display are
always synchronized.
1.
Push the crown in to position
2.
Rotate the crown to move the mode hand to indicate [TME] or
[CAL].
• When [CAL] is selected, the calendar is displayed.
3.
Press and release the lower right button
Time
zone
button
to select an area.
B
+9
The time or calendar of the selected area is indicated on the digital display
and the area name display.
+10
+11
4.
Press and release both the upper right button
+12
right button
B
-10
The time of the digital and analog (hour/minute/24-hour hands) sections
-9
switches.
-8
Registering an area of a time zone you like
-7
-6
You can register one new area of a time zone on the world time of this watch.
• Check the time zone (based on the UTC) of the area you want to register
beforehand.
-5
• The time zone can be set in 1 hour units.
-4
1.
Push the crown in to position
-3
2.
Rotate the crown to move the mode hand to point [SET].
3.
Pull the crown out to position
The area name and the time zone of the area previously set are displayed on
the area name display and the digital display.
• "---" is indicated when they have not been
set.
4.
Press and release the upper right button
change the target to be changed.
• The target that is blinking is adjustable.
5.
Rotate the crown to set the target.
• Input alphabets and numbers to indicate the new area name. Following
letters, numbers and symbols can be used.
Alphabet: A to Z
Numbers: 0 to 9
Symbols: "--" (hyphens) and " " (blank spaces)
• The time zone can be set from "-11" to "+12".
• When you rotate the crown quickly, the indication will change continuously.
To stop the rapid change, rotate the crown.
6.
Repeat steps 4 and 5 to set the area name and the time zone.
7.
Push the crown in to position
8.
Rotate the crown to move the mode hand to point [TME].
9.
Press and release the lower right button
button
repeatedly to select the area newly registered.
B
Deleting the registered area
Set the area name to "---".
C650/C651/C652 Abbreviated instruction
.
0
A
at the same time.
.
0
.
2
B
.
0
A
or upper right
and lower
A
repeatedly to
or upper right
2/4

Advertisement

loading

This manual is also suitable for:

C651C652