B Setting The Clock; C Setting The Program Time; D Automatic Shut Off Time - Cuisinart DGB625BCU Manual

B Setting the Clock

n When the unit is plugged in, the screen will show 12:00.
n Press and hold either the 'HR' or the 'MIN' button until the numbers start to flash.
n Then press the 'HR' and 'MIN' buttons to scroll through the numbers. When the numbers
stop flashing, the time has been set.
N.B. When you go past the number 12, the letters 'PM' will appear to adjust the time from
12 noon to midnight. When 'PM' is not shown, the time indicated corresponds to the 'AM'
hours, from 12 midnight to 12 noon. Always make sure that the time is set according the
correct period so that the programming is correct.

C Setting the Program Time.

n You can set the timer to delay the brewing start time up to 24 hours in advance ideal
for waking up to freshly brewed coffee in the morning.
n Press and hold the 'PROGRAM' button. The numbers on the clock display and the
indicator light will flash.
n To set the desired start time, press and hold either the 'HR' or 'MIN' buttons until the
numbers start to flash. Then press and hold the 'HR' and 'MIN' to scroll through the
numbers. When the numbers stop flashing, the scheduled time is programmed and the
display will revert back to the current time.
n To check the programmed start time press and hold the 'PROGRAM' button, the
programmed start time will display and the green indicator light must be illuminated.
n To cancel the programed start time, press the 'PROGRAM' button and the green light
will go out.
N.B. You will not be able to program the start time while the coffee machine is running.
D Automatic Shut-off Time
The warming plate can be programmed to automatically shut off between 0-35 minutes
after brewing has finished. The default time is 35 minutes. To change the automatic shut-
off time please follow the instructions below:
n Press and hold the 'AUTO OFF' button until the red power light and the Clock display
begin to flash.
n To set the desired start time, press the 'MIN' button as described for setting the clock,
the pre-set setting is 0:35 and can be adjusted between 0:00 and 0:35. When the
numbers stop flashing, the scheduled time is programmed.
n The Auto Shut-off time can be programmed either before, during or after brewing.
10