Advertisement
10.
Use the Ethernet cable to connect the UBH1706 to the
Ethernet port of the networking device for which you want to
enable wireless capability.
Ubee
UBH1706
11.
Congratulations! You are now ready to use the wireless
network.
NOTE: If you wish to repeat the setup process, or if you experienced
trouble logging into the web user interface, reset the UBH1706 to factory
default settings. To do this, press and hold the WPS button on the device
for 10 seconds until the Power LED is blinking.
Game Console
or
Smart TV
or
DVD/Blu-Ray Player
www.ubeeinteractive.com
UBH1706-AA00 Quick Installation Guide
(4)ACCESS POINT (AP) MODE SETUP
The UBH1706 can act as a wireless access point (AP). Connect it to
a broadband router or modem with Internet access and provide
wireless service to wireless-enabled clients such as smartphones,
game consoles or smart TVs.
Internet
Cable Modem
Connect to a Broadband Router to
create a Wireless AP
Follow the procedure below for Access Point (AP) mode setup.
Please ensure that your computer is in DHCP client mode,
obtaining its IP address automatically from a DHCP server.
1.
Switch the UBH1706 to AP mode.
Wireless Access
Point Mode
Ubee
UBH1706
Router
AP
RP
CL
8
Advertisement
