Advertisement
Quick Links
UBH1706-AA00
Dual Band Wireless LAN Repeater
IEEE 802.11a/b/g/n/ac
Quick Installation Guide
CONTENTS
(1) Basic Installation ........................................ 2
(2) Repeater Mode Setup .............................. 2
(3) Client Mode Setup ......................................5
(4) Access Point Setup ....................................8
(5) Enabling/Disabling LED Lights ............11
Advertisement
Summary of Contents for Ubee UBH1706-AA00
- Page 1 UBH1706-AA00 Dual Band Wireless LAN Repeater IEEE 802.11a/b/g/n/ac Quick Installation Guide CONTENTS (1) Basic Installation …………………..…….………. 2 (2) Repeater Mode Setup ………………..….…… 2 (3) Client Mode Setup …………………..……………5 (4) Access Point Setup ……………………….……..8 (5) Enabling/Disabling LED Lights …..…….11...
- Page 2 UBH1706-AA00 Quick Installation Guide (1) BASIC INSTALLATION (2) REPEATER (RP) MODE SETUP When connected to a wireless router or gateway, the UBH1706 will Select a working mode from the switch on the bottom of the act as a wireless repeater. It will boost wireless signals and extend device.
- Page 3 UBH1706-AA00 Quick Installation Guide If your access point (wireless router or gateway) also supports If the WPS connection is successfully established, the UBH1706 WPS, this method is recommended as it is a fast and secure means will reboot. Upon completion of the reboot process, the of connection.
- Page 4 UBH1706-AA00 Quick Installation Guide Using the Web User Interface (UI) In the login box, enter the username and password. The default values are: Below is the procedure for establishing a wireless connection Username: admin by using the web user interface. Please ensure that your...
- Page 5 UBH1706-AA00 Quick Installation Guide The system will begin Following successful setup, detail about the configuration is verifying the wireless displayed as in the example below. Click APPLY to end the key. Results will be setup process, or click Back to return to the setup pages.
- Page 6 UBH1706-AA00 Quick Installation Guide (3) CLIENT (CL) MODE SETUP Using the WPS (Wi-Fi Protected Setup) Button When configured in Client mode, the UBH1706 can enable When both devices are WPS capable, you can join a secure WiFi wireless capability for a networking device. It essentially acts as a network without entering the network name and password.
- Page 7 UBH1706-AA00 Quick Installation Guide Using the Web User Interface (UI) If the WPS connection is successfully established, the UBH1706 will reboot. Upon completion of the reboot process, the Below is the procedure for establishing a wireless connection by connection settings will be in effect.
- Page 8 UBH1706-AA00 Quick Installation Guide In the login box, enter the username and password. The default The system will begin values are: verifying the wireless key. Results will be Username: admin displayed within 20 seconds. If you are Password: 1234 notified that the key...
- Page 9 UBH1706-AA00 Quick Installation Guide Use the Ethernet cable to connect the UBH1706 to the (4)ACCESS POINT (AP) MODE SETUP Ethernet port of the networking device for which you want to The UBH1706 can act as a wireless access point (AP). Connect it to enable wireless capability.
- Page 10 UBH1706-AA00 Quick Installation Guide Plug the UBH1706 into a power outlet. Within a few minutes, Open a web browser and enter http://repeaterxxxx in the you should see the Power LED light up. If the power LED does address bar, where xxxx is the last 4 digits of the device MAC not light up, check that the power outlet is working properly.
- Page 11 UBH1706-AA00 Quick Installation Guide The screen below shows configuration options when WEP This screen shows configuration options when WPA Pre-Shared encryption is selected: Key encryption is selected: Field Description Field Description Encryption WPA pre-shared key has been selected. Encryption WEP has been selected.
- Page 12 UBH1706-AA00 Quick Installation Guide After configuring the 2.4GHz network security and clicking (4)Enabling/Disabling the LED Lights Next, repeat the security configuration process for the 5GHz wireless network and click Next. After UBH1706 setup is complete and the repeater has completed the reboot process, you will be able to log into the web UI to access Following successful setup, detail about the configuration is...
- Page 13 UBH1706-AA00 Quick Installation Guide www.ubeeinteractive.com...