Advertisement
4.
In the login box, enter the username and password. The default
values are:
Username: admin
Password: 1234
Click the OK button to
continue.
5.
All nearby wireless access points are displayed. Find the access
point to which you want to connect and select it. Click the Next
button to continue. NOTE: If you do not see your desired access
point in the list,
click the Refresh
button. If it still
does not appear,
try moving the
wireless repeater
c l o s e r t o t h e
access point.
6.
After selecting the access point you will be prompted to enter
the access point's wireless security key (wireless password).
Enter it in the KEY
fi e l d a n d t h e n
click NEXT.
7.
The system will begin
verifying the wireless
key. Results will be
displayed within 20
seconds. If you are
notified that the key
is incorrect, go back,
confirm the correct
key and re-enter it. If
the key is correct,
c l i c k
continue.
8.
Following successful setup, detail about the configuration is
displayed as in the example below. Click APPLY to end the
setup process, or click Back to return to the setup pages.
9.
After clicking APPLY, the UBH1706 will reboot. This process
may take several minutes.
www.ubeeinteractive.com
UBH1706-AA00 Quick Installation Guide
N e x t
t o
7
Advertisement
